Teslavolts HyperCharger Factory · Noida · Make in India
Teslavolts designs its power electronics and IC3 controllers in India and builds Ai DC HyperChargers and Level 2 Smart Chargers at its factory near Noida. Dedicated DC development bays, a world-class AC assembly line and a modern AC and DC test lab mean every charger is proven at full load before it leaves.
Inside the factory
Tap a zone to see what happens there. Khasra no. 2090, Rabupura, Jewar (Noida region), Uttar Pradesh 203209
Every PCB, power module, contactor and cable is inspected and logged against its batch before it reaches the line.
Dedicated bays where new HyperCharger platforms are designed, prototyped and validated, from the power stage to the IC3 firmware.
Cabinets are built station by station: power modules, IC3 controller, DC contactors, metering, liquid or air cooling and CCS2 guns.
A world-class Level 2 line: enclosure, IC3 board, RCD and protection, wiring and sealing, with a 100% functional test at the end.
EV simulators, regenerative DC load banks, power analysers, insulation and earth testers, and protocol test benches.
DC chargers run at full rated power for hours while temperatures, efficiency and every protection are logged.
Heat, cold and humidity cycling to prove chargers for Indian summers, monsoons and Himalayan winters.
Final inspection, unit passport, packing and dispatch to sites across India.
Factory twin
An animated model of how every Teslavolts charger is built and tested. Switch between the DC and AC lines, change the speed, or tap a station.
Station 1
Power modules, PCBs and contactors checked and logged by batch
Line log Units completed: 0
Animation of our build and test sequence. Serial numbers and timings in the log are illustrative.
AC and DC test lab
Our lab tests chargers the way India uses them: at full power, in heat and humidity, with every kind of car and over the network.
Hold DC chargers at full rated power for burn-in, feeding energy back instead of wasting it as heat.
Behave like a car: handshake, charge curves, faults and stop requests, for AC and DC.
Measure efficiency, power factor and harmonics at every load point.
Prove insulation, dielectric strength, earth continuity and RCD trip times on every unit.
Cycles heat, cold and humidity to prove chargers for Indian conditions.
Finds hot spots on busbars, contactors and guns during full-load runs.
Pick a charger and run its factory test sequence. Each step shows what our equipment measures, and a unit passport is issued at the end.
Press Start test to run the sequence
Unit passport
PASSED
Simulation of our test sequence. Values are typical, not a certificate for a specific unit.
Dedicated DC development bays
Separate bays keep design, firmware, integration and validation moving in parallel, so new platforms reach the line faster.
Bay 1
Rectifier and DC-DC stages designed in-house, characterised for efficiency, ripple and thermal margin.
Bay 2
The controller that runs every Teslavolts charger, with onboard Ai for predictive maintenance and load balancing.
Bay 3
New cabinets brought together with cooling, metering and dual CCS2 guns, then run on the load bank.
Bay 4
Protocol, interoperability and endurance tests, with data from chargers in the field feeding the next design.
World-class AC assembly
A dedicated AC line with fixed stations, poka-yoke fixtures and quality gates. Every unit is functionally tested with an EV simulator and safety-tested before packing.
Technology made in India
Our Intelligent Charging and Communication Controller manages the charge session, safety, metering and cloud connection. It is also available to other charger makers.
The power electronics are designed by Teslavolts in India rather than built around imported core modules.
Controllers watch temperature, voltage, current and component health to predict faults before they stop a charger.
Chargers on one site share the available grid connection to protect the transformer.
Power electronics research with IIT Delhi, and incubation at IIT Patna.
Multi-layer PCBs made by partners in Ahmedabad and Noida; final assembly, integration and testing in our factory.
Certifications vary by model; each product page lists its certificates.
DC Pro 120 kW120 kW DC
DC Pro 180 kW180 kW DC
DC Pro 240 kW240 kW DC
DC Premier Plus 320 kW320 kW DC
DC Premier Plus 360 kW360 kW DC
DC Premier Plus 400 kW400 kW DC
DC Mini 30 kW30 kW DC
DC Pro 60 kW60 kW DC
Portable Mini3.5 / 7 kW
Portable Pro3.5 / 7 kW
Home7 / 11 / 22 kW
Smart Pro3.5 / 7 / 11 / 22 kW
Twins Pedestal2 × 11 / 2 × 22 kW
Ad. Bright AC2 × 11 / 2 × 22 kWNear Noida, at Khasra no. 2090, Rabupura, Jewar, Uttar Pradesh 203209. Visits are by appointment.
Ai DC HyperChargers, DC Fast Chargers and Level 2 Smart AC chargers, with final assembly, system integration and testing done in-house.
Each unit passes incoming inspection, insulation and safety tests, a functional charging test with an EV simulator and an OCPP check. DC chargers also run a full-load burn-in on a load bank before dispatch.
Yes. The IC3 controller is available to other manufacturers. Contact us with your volumes and requirements.
Yes, customers, partners and investors can book a visit through the Contact page.
Customers, partners and investors are welcome at the HyperCharger Factory by appointment. Khasra no. 2090, Rabupura, Jewar (Noida region), Uttar Pradesh 203209


